Product ID:PRIMER SURF SNDG LAC ENGRAY 36231
MSDS Date:03/12/1991
FSC:8010
NIIN:00-290-4078
MSDS Number: BKJJC

PRATT & LAMBERT INC., INDUSTRIAL COATINGS DIV.

WICHITA, KS 67201
US

Emergency Phone: 800-255-3924

Info Phone: 316-733-1361

Preparer: W A ELLISON

Cage: PRATT

PRATT AND LAMBERT INC

2153 CLEVELAND, OH 44101-1027 US

Telephone: 216-566-2902

Cage: 61196

ISOBUTYL ACETATE (SARA III)

CAS: 110-19-0

RTECS: AI4025000

Fraction By Weight: 30%

OSHA PEL 150 PPM

ACGIH TLV: 150 PPM; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

ISOPROPYL ALCOHOL (SARA III)

CAS: 67-63-0

RTECS: NT8050000

Fraction By Weight: 5%

OSHA PEL 400 PPM/500 STEL

ACGIH TLV: 400 PPM/500STEL;9192

NITROCELLULOSE (RESIN)

CAS: 9004-70-0

RTECS: WG2934500

Fraction By Weight: 5%

ISOBUTYL ALCOHOL (SOLVENT) (SARA 313) (VAPOR PRESSURE 10 MM

CAS: 78-83-1

RTECS: NS1752000

Fraction By Weight: 5%

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 5 - 10%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: < 5%

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

SILICA, CRYSTALLINE - CRISTOBALITE

CAS: 14464-46-1

RTECS: VV7325000

Fraction By Weight: 5%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.05 MG/M3 RDUST9293

SILICA, CRYSTALLINE - QUARTZ

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: < 1%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293

TALC (CONTAINING NO ASBESTOS)

CAS: 14807-96-6

RTECS: WW2710000

Fraction By Weight: 15%

OSHA PEL 2 MG/M3 RDUST

ACGIH TLV: 2 MG/M3 RDUST; 9192

DI-SEC-OCTYL PHTHALATE (DI-2-ETHYLHEXYL-PHTHALATE) (SARA

CAS: 117-81-7

RTECS: TI0350000

Fraction By Weight: 5%

OSHA PEL 5 MG/M3/10 STEL

ACGIH TLV: 5 MG/M3; 9192

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS

TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 10 - 30%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

6.0)

CAS: 8030-30-6

RTECS: DE3030000

Fraction By Weight: 5%

OSHA PEL 300 PPM/400 PPM STEL

ACGIH TLV: 300 PPM / 1350 MG/M3

4.73 LB/GL LESS WATER & NPRS*; 568 G/L LESS WATER;

RTECS: 9999999VO

14.34 LB/GAL SOLIDS; 1721 G/L SOLIDS; CALCULATED

RTECS: 9999999VO

Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:IRRITATION (GASTROINTESTINAL, NOSE,
THROAT, EYE, SKIN). LUNG ASPIRATION:CHEMICAL PNEUMONITIS-CAN BE
FATAL. CENTRAL NERVE SYS DEPRESSION. SKIN ABSORPTION, DEFATTING.
OVEREXPOSURE: CRYS SILICA-PNEUMOCON IOSIS(LUNG DISEASE),
XYLENE-LIVER,KIDNEY,BLOOD DAMAGE. SOLVENTS-PERMANENT BRAIN &
NERVOUS SYSTEM DAMAGE. TOLUENE-LIVER.
Explanation of Carcinogenicity:DI(2-ETHYLHEXYL)PHTHALATE, CRYSTALLINE
SILICA ARE LISTED AS A POTENTIAL CARCINOGENS.
Effects of Overexposure:INGEST: NAUSEA/VOMITING. INHALE: HEADACHES,
DIZZINESS, NAUSEA, CONFUSION.
Medical Cond Aggravated by Exposure:RESPIRATORY CONDITIONS MAY BE
AGGRAVATED BY CRYSTALLINE SILICA.

First Aid:INGEST: DO NOT INDUCE VOMITING. CALL POISON CONTROL,
EMERGENCY ROOM OR PHYSICIAN IMMEDIATELY. INHALE: REMOVE TO FRESH
AIR IMMEDIATELY. GIVE ARTIFICIAL RESPIRATION IF NEEDED. KEEP WARM &
QUIET. GET IMM EDIATE MEDICAL AID. EYE: FLUSH THOROUGHLY WITH LARGE
AMOUNT OF WATER FOR 15 MIN. GET MEDICAL AID. SKIN: REMOVE
CONTAMINATED CLOTHES. WASH AREA WITH SOAP AND WATER. IF IRRIT
PERSISTS CONSULT A DOCTOR.

Flash Point:20.0F,-6.7C
Autoignition Temp:Autoignition Temp Text:572F
Lower Limits:1.0
Upper Limits:13.0
Extinguishing Media:USE NFPA CLASS B(CO2, ALL PURPOSE DRY CHEMICAL OR
ALCOHOL FOAM) FOR LIQUID FIRES. POLYMER FOAM PREFERRED FOR LARGE
FIRES
Fire Fighting Procedures:WATER MAY BE INEFFECTIVE, USE TO COOL
CONTAINERS (FOG NOZZLE PREFERABLE) TO PREVENT PRESSURE
BUILD-UP/AUTO- IGNITION/EXPLOSION WHEN EXPOSED TO EXTREME HEAT.
Unusual Fire/Explosion Hazard:DURING EMERGENCY CONDITIONS, OVEREXPOSURE
TO DECOMPOSITION PRODUCTS MAY CAUSE A HEALTH HAZARD. SYMPTOMS MAY
NOT BE IMMEDIATELY APPARENT. GET MEDICAL ATTENTION.

Spill Release Procedures:KEEP SPECTATORS AWAY. ELIMINATE ALL IGNITION
SOURCES. DIKE, CONTAIN & REMOVE WITH INERT MATERIAL (SAND, EARTH,
ETC). USE COVERED METAL CONTAINERS FOR RECOVERY AND DISPOSAL. USE
NON-SPARKING TOOLS. PRE VENT CONTAMINATION OF SEWERS,
STREAMS,GROUNDWATER.

Handling and Storage Precautions:DO NOT STORE ABOVE 100F. LARGE
QUANITIY STORAGE: COMPLY WITH OSHA 29CFR1910.106. DO NOT TAKE
INTERNALLY. KEEP FROM CHILDREN. DO NOT REUSE CONTAINERS.
Other Precautions:CONTAINERS SHOULD BE GROUNDED AND BONDED TO THE
RECEIVING CONTAINER. DO NOT WELD, BRAZE OR CUT ON EMPTY CONTAINER.
NEVER USE PRESSURE TO EMPTY. DRUM IS NOT A PRESSURE VESSEL. KEEP
CONTAINERS CLOSED WH EN NOT IN USE.

Respiratory Protection:RESTRICTED AREA: NIOSH APPROVED CHEMICAL
CARTRIDGE RESPIRATOR. SPRAYING: MECHANICAL PREFILTER MAY BE
REQUIRED. CONFINED AREAS: NIOSH/MSHA APPROVED AIR SUPPLIED
RESPIRATOR. EXCEEDED TLV AREA: NIOSH/MSH A APPROVED RESPIRATOR
W/RIGHT FACTOR.
Ventilation:GENERAL DILUTION/LOCAL EXHAUST VENTILATION IN SUFFICIENT
VOLUME & PATTERN TO KEEP CONCENTRATIONS BELOW EXPOSURE LIMITS.
Protective Gloves:REPEAT/PROLONG: IMPERMEABLE GLOVES.
Eye Protection:SAFETY GLASSES W/SIDESHIELD. FACESHIELD.
Other Protective Equipment:NOT LIKELY TO BE NEEDED.
Work Hygienic Practices:DO NOT BREATHE SANDING DUST.
Supplemental Safety and Health

HCC:F2
Boiling Pt:B.P. Text:180 TO 302F
Melt/Freeze Pt:M.P/F.P Text:-50F,-46C
Decomp Temp:Decomp Text:1832F,1000C
Vapor Pres:40 @ 68F
Vapor Density:> AIR
Spec Gravity:1.1
pH:4-7
Viscosity:>200 CST
Evaporation Rate & Reference:SLOWER THAN DIETHYL ETHER
Solubility in Water:SLIGHT
Appearance and Odor:LIQUID, SOLVENT ODOR
Percent Volatiles by Volume:67

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS OR ALKALINE MATERIALS.
Stability Condition to Avoid:AVOID EXCESS HEAT (> 100F) & IGNITION
SOURCES.
Hazardous Decomposition Products:BURNING, (INCLUDE HEAT BY
WELDING/CUTTING) PRODUCES SMOKE, CARBON MONOXIDE & CARBON DIOXIDE,
POSSIBLE NITROGEN OXIDE.

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH FEDERAL, STATE AND
LOCAL REGULATIONS & LAWS. INCINERATE IN EPA FACILITY. DO NOT
INCINERATE CLOSED CONTAINERS USE PRECAUTIONS FOR DISPOSAL OF
FLAMMABLE MATERIAL-D001. USE HAZ ARDOUS WASTE LANDFILL FOR USED
ABSORBENTS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.